My radio station is not showing up in the public Shoutcast.com directory
After setting up your station it may take the Shoutcast directory up to 24 hours to receive and process the information. If 24 hours didn't pass yet, you might have to wait a bit longer.
Check your configuration settings
By default your station should be set up as a public station, however to make sure your settings are correct, try following the next steps:
step 1: Login to the Client Centre and choose "Login to Centova".
step 2: From the side bar select "Configure Server".
step 3: Choose the tab "Server Overrides".
step 4: Make sure "Public Server" is set to "Automatic" or "Always". In case it's set to "Automatic", ensure that your streaming software is set to "Public Streaming". If you do not have such an option, please set "Public Server" to "Always".
Restart the Stream
Once you've completed any of the above steps, make sure that you have restarted the stream in order for the changes to take effect. In Centova, choose "Restart Server" in the lower left corner. The reload option may not work, so be sure to choose restart.
Wait 24 hours
You may need to wait as long as 24 hours for the Shoutcast directory to receive and approve the information about your new station.
Was this answer helpful?
Basically none. With our servers, you’ll just have to setup some basic information about your...
Generate your free HTML5 Radio Player code for your site A top-notch responsive Radio...
Setting up your Icecast Statistic Relay The final step is to create a Statistics...
Often times we are contacted because people have a hard time getting connected to the server so...
1.) Log into the Centovacast Control panel. Your log in information was sent to you in a...